How To Your Refrigerator’s Water Filters Like A Las Vegas Appliance Repair Professional!
A water filter’s purpose is in it’s name; to filter your water. If you have started to notice that the water or ice that you are getting from your fridge tastes funny, or is discolored; your water filter replacement is probably long overdue. You can hire a Las Vegas appliance repair professional to change the filters for you. However, this is something that you can easily do yourself. It wouldn’t hurt to learn how to change the water filters on your fridge the right way. You will be keeping you and your family from getting sick, and saving yourself some money!
Knowing When To Replace Your Filters
You should replace your filters every 6 months, or sooner if you begin to notice discolored or off-tasting water or ice. Although if you do not rely on the water/ice dispenser on your fridge that much, you might be able to stretch out the time between replacements.
Identifying What Type Of Filter You Have
The filters in refrigerators vary by model. This means that they way they are replaced varies as well. You are always able to use the internet as a resource to find out what type of filter you need. Knowing the exact part number that you need can end up being very useful. Once you know this, you can enlist the help of a trusted Las Vegas appliance repair professional to help you get the best deal on appliance parts. There are three types of filters that most household refrigerators will have.
- Twist-In Filters – The compartment that will hold a twist-in filter will most likely be found on the inside of your unit. On average, you can expect to pay $15-$30 to replace these filters.
- Push-In Filters – These filters are often built into the appliances, and are generally located in a compartment on the exterior. However, sometimes they may be found inside of the unit like twist-in filters. Generally they will cost about $20-$50 based on the age and brand of your unit.
- Inline Filters – You probably won’t be seeing this type of filter on your unit unless it is an older model. These filters do not have their own compartment and can be seen when looking at the refrigerator’s back side.
Tips From A Las Vegas Appliance Repair Professional On Changing Your Refrigerator’s Water Filters
- For Twist-In Filters – Start by locating the cap on your filter, once you do this the old filter should be able to be twisted out. Once you have gotten rid of the old filter, you should be able to simply twist-in the new filter!
- For Push-In Filters – The first thing that you will want to do is kick the old filter to the curb. If you cannot simply twist off the cap, you should be able to locate an “eject” button on the filters compartment. Be sure that you throw away the old filter, but keep the filter’s cap! Now you should be able to line up the arrows on the new filter and the cap, and turn it in! Do this until the “eject” button clicks back into place.
- For Inline Filters – In-line filters attach directly to the water stream and do not have their own compartment. Replacing these might be a little bit more tricky; and might warrant a call to a Las Vegas appliance repair professional. Make sure that you know what you are doing before you begin, as you will have to act quickly!
After you replace the filter you might need to check and make sure the water filter indicator light has been reset. In addition to that; if replacing your filter warranted that you turn off any parts of the system, make sure that you get them up and running as soon as possible!
